Eclipse AVN5510 Owner's Manual page 31


Touch ,
Q1 Q2
curve.
• The Q curve patterns set the median
frequency bandwidth as follows:

Repeat steps
• It is not possible to set more than one band in the same channel to the same median
frequency.

Touch the switch you want to use to
save ( EQ1 to
a beep.
• Save the PEQ settings for future use.
BACK
• Touch
The PEQ mode adjustment will be
saved and the system will return to the
previous operation screen.
• If you touch and hold
continue to adjust automatically until it reaches the center value (0). Touch
or again to continue adjustment.
FLAT
• Touch
, to select a Q
Q3
Switch
Q1
Q2
Q3
 
through to change the setting for each band.
EQ5 ) until you hear
after making settings.
or
to return to the center value (0).
Q curve pattern
Wide
Normal
Narrow
during fine adjustment, the frequency level will
31