SP Controls PixiePlus Projector Controller for Epson Installation Manual page 7

IV. Wiring PixiePlus to Display Device
Installation Overview
Ceiling Plate
(
RS-232 Serial Cable
The PixiePlus DCM interface connects to the ceiling plate (
) with a single CAT5 cable.
The ceiling plate provides a female DB9 for RS-232 connection to the Epson pro-
jector, using a straight-through RS-232 serial cable (not included). An IR emitter
(included) connects to the ceiling plate with a captive screw connection. The ceiling
plate also includes a connection jack for the wall wart power supply (see page 7).
The single CAT5 cable carries power and control data between the ceiling plate
and the PixiePlus DCM.
1. Install the ceiling plate (
A standard ceiling-mounted electrical box with AC power must be installed nearby
(provided by electrician).
2. Plug the PXE-DCM-CAT5-ADAPTER into the back of the assembled PixiePlus
DCM.
)
PXE-DCM+ 6VDC
Power Supply
PXE-DCM+
) near the Epson projector.
CAT5
6