Table of Contents
Advertisement
II. Installation Overview
Bezel
• 1 PixiePlus Circuit Board
• 6 White Plastic Button Inserts and 7 Rubberized Button Pads
• PXE-DCM-RTC Real Time Clock Module
• PXE-DCM-CAT5-ADAPTER – PixiePlus CAT5 Output Adapter
• PXE-DCM-EMIT-CAT5-232/IR – RJ45-to-DB9/IR Adapter Ceiling Plate
• IR Emitter
• IR Emitter Bud Holder
• 1 6VDC Regulated Power Supply
• IR Emitter Cable Anchors
• 2 Bezels (ivory and white)
• Installation Guide
• PixiePlus ELPSP10 Supplement
• Mounting Screws
• Paper Clip (for IR-learning)
• 1 CAT5, CAT5e, or CAT6 Cable (Required)
• 1 RS-232 Serial Cable (male-female straight DB9) (Required)
• 1 Leviton Decora™ wall plate (Required. Match to bezel color.)
• 1 Single-Gang Back Box (Optional. SP Controls recommends using a grounded
back box)
• PixiePlus programming tool
PixiePlus RS-232 codes or schedule events (Optional)
Inserts
Circuit Board
Single-Gang Wall Box
(not included)
:
) for reconfiguration of the
3
Advertisement
Table of Contents
