I. Introduction
Mounting Screws
IR Transmitter
Insert Modules
PixiePlus Board
Preconfigured for Easy Setup
The PixiePlus (PXE-DCM+) Projector Controller for Epson ® (ELPSP10) is a single-
gang AV control device configured to provide power, source selection, and volume
control of any compatible Epson projector with RS-232. Users who wish to control
an Epson projector with the Projector Controller's preconfiguration may disregard
the PixiePlus programming instructions.
If it is necessary to reprogram the PixiePlus, the modular button interface and IR
device control codes may be easily reconfigured. Modifying the RS-232 commands
programmed to each button requires the SP Controls Programming Wand (
, sold separately).
The PixiePlus may be configured with an Inactivity Shutdown Timer (pg. 14) to pro-
tect bulb life, or with a Security Lock (pg. 16) to prevent unauthorized use. One
PixiePlus may be used to control multiple projectors in tandem with a 1x2 CAT5
splitter (sold separately).
The PixiePlus may be configured with schedule events (security lock, auto power
off, etc.) at specific times and date ranges using the PXE-DCM-RTC Real Time
Clock Module (included). Configuration of schedule events requires the SP
Controls Programming Wand (
Programming Wand documentation for schedule configuration instructions.
The PixiePlus is designed for use with a Leviton Decora™ wall plate (not included).
The PixiePlus may be installed in a single-gang back box (not included).
Bezels are available in black (
IR Learning Window
Status LED
Learning Mode
Activation Switch
, sold separately). See
) and gray (
).
2
Need help?
Do you have a question about the PixiePlus Projector Controller for Epson and is the answer not in the manual?