Adjustment Program Installation Procedure - Epson STYLUS COLOR 480 Service Manual

EPSON Stylus COLOR 480
o
Sequential repair service program
This program provides you the suitable adjustment order in the program according to
the repair parts. The available functions are as following table.
Table 5-3. Sequential repair service program
Repair item
1 Printhead removal
2 Printhead replacement
3 Main board replacement
4 CR Unit replacement or removal
5 CR Motor replacement
6 Printer mechanism replacement
7 Waste Ink pad replacement
Adjustment
Included Adjustment item
Head Cleaning, Nozzle check,
Bi-d adjustment.
Initial charge, Head ID Input,
Nozzle check, Bi-d adjustment.
EEPROM Back up, Load on EEPEOM
or
Head ID input, Bi-d adjustment,
Ink pad replacement, I/C replacement
(default setting, market setting)
Bi-d adjustment
Bi-d adjustment
Initial ink charge, Head ID input, Nozzle
check, Bi-d adjustment
Waste ink pad counter reset
The user interface of the Sequential repair service program is as following figure.
Figure 5-2. Sequential repair service program main menu

5.1.3 Adjustment Program Installation Procedure

This adjustment program is in the 3.5 2HD FD. The first FD is the installer disk. When
you execute Setup.exe, the installation of the program will be started under Windows
95/98. After installation is completed, the Stylus COLOR 480 icon will be
automatically made in the program menu. Go "Start" -> "Program" and click the icon
to start this program.
Overview
Revision B
102