EPSON Stylus COLOR 480
6.
Remove the Torsion spring 25.7 from the bottom of the ASF frame and the Pad holder
(Paper return plate).
ASF Frame
Figure 4-58. Removing the Torsion spring 25.7
7.
Remove the Pad holder (Paper return plate) from the ASF frame.
Pad holder
Figure 4-59. Removing the Pad holder (Paper return plate)
Disassembly and Assembly
Torsion spring 25.7
ASF Frame
n
Make sure that the each tip of the Torsion spring 25.7 is set in the
slot of the Pad holder and ASF frame. Refer to Figure 4-57.
n
Make sure that the Pad holder moves smoothly after assembling
it to the ASF frame.
n
Make sure the change lever setting position. Refer to following
figure.
Figure 4-60. Change lever setting position
Disassembly
Revision B
97