Solving Printer Software Problems - Epson Stylus COLOR 440 Manual

The printer has finished charging the ink cartridge, but the
flashing
Possible cause
The ink cartridge
clamp isn't locked
down.
Packing material
remains in the printer.
The printer needs to
initialize.
The printer may be
receiving data from the
computer.
Troubleshooting
Solution
Press down on the clamp to lock it into place.
Remove the packing material, following the instructions on the
Unpacking Sheet in the box.
If the printer is not moving or making noise, but the light is still flashing
after 5 minutes have passed, turn the printer off. If the light is still flashing
when you turn it back on, contact EPSON as described in
Help.
Turn the printer and computer off. Disconnect the printer from the
computer. Turn the printer on. If the light continues to flash for more than
5 minutes, contact EPSON as described in

Solving Printer Software Problems

If you have trouble with your printer software, first check that your
printer is selected as the default Windows printer; see your Printer
Basics guide.
If you still have problems with your printer software, check the
following solutions. If you need to uninstall the printer software, see
Uninstalling Printer Software.
2
power light is still
Where To Get
Where To Get Help.
Page 135