Epson Stylus COLOR 440 Manual page 122

2
Troubleshooting
When all the lights flash, your printer may have an internal error.
Turn off the printer by pressing the
seconds; then turn it on again. If this does not clear the error
condition, contact EPSON as described in the Introduction.
When all the lights are off, the printer is not receiving power. Try
these solutions:
Make sure the printer is turned on.
Turn off the power and plug the power cord into the outlet
again.
Plug a lamp into the outlet to make sure the outlet is working.
Also, make sure the outlet isn't controlled by a switch or
timer.
power button; wait several
Page 122