Epson Stylus COLOR 440 Manual page 134

A black or color ink out light is flashing or on
Possible cause
If flashing, the ink
supply is getting low.
If on, the ink cartridge
is empty.
The paper out and
Possible cause
A carriage error has
occurred.
All the lights are flashing
Possible cause
You haven't removed
all the packing
material from the
printer.
An internal error may
have occurred.
Troubleshooting
Solution
You need to replace the indicated ink cartridge soon. Make sure you
have a new cartridge, then see
instructions.
You must replace the indicated ink cartridge; see
Cartridge for instructions.
power lights are flashing
Solution
Remove any paper in the printer. Press the
30 seconds. Then press it again. Turn the printer off, wait a few seconds,
and then turn it on and try printing again. If the error is not cleared,
contact EPSON as described in
Solution
Remove the packing material, following the instructions on the
Unpacking Sheet in the box.
Turn off your printer, wait a few seconds, and turn it on again. If the lights
still flash or stay on, contact EPSON as described in
Replacing an Ink Cartridge
Replacing an Ink
-
load/eject button for about
Where To Get Help.
Where To Get
for
Help.
Page 134