Solving Printer Software Problems - Epson STYLUS Color 850Ne User Manual

Troubleshooting
All the lights are flashing.
Possible cause
You haven't removed all the
packing material from the
printer.
An internal error may have
occurred.
The printer has finished charging the ink cartridge, but the P power light is
still flashing.
Possible cause
The ink cartridge clamp
isn't locked down.
Packing material remains in
the printer.
The printer needs to
initialize.
Solution
Remove the packing material, following the instructions on the
Notice Sheet in the box.
Turn off your printer, wait a few seconds, and turn it on again. If
the lights still flash or stay on, contact EPSON as described in the
Introduction.
Solution
Press down on the clamp to lock it.
Remove all packing material, following the instructions on the
Notice Sheet in the box.
If the printer is not moving or making noise, but the light is still
flashing for more than 10 minutes, turn the printer off. If the light is
still flashing when you turn it back on, contact EPSON as described
in the Introduction.

Solving Printer Software Problems

If you have trouble with your printer software, first check that
your printer is selected as the default Windows printer or as the
current printer in the Macintosh Chooser; see the Setup Guide
for instructions.
If you still have problems with your printer software, check the
following solutions.
6-10