Epson Stylus COLOR 440 Manual page 136

After you install your printer software, you see the Windows 95 or 98
New Hardware Found window
Possible cause
An operating system
error has occurred.
In Windows 95, 98, or NT 4.0 the Status Monitor 2 window doesn't appear
Possible cause
You may not have
restarted your
computer after
installing Status
Monitor 2.
Bi-directional support
is not enabled.
Troubleshooting
Solution
Click Do not install a driver, and then click OK.
Never select any other option on the New Hardware Found window.
Solution
Click Start, select Shut Down, click Restart the computer, and click
Yes to restart your computer. Then try using Status Monitor 2.
Make sure your printer is connected to your computer with a
bi-directional cable. Then click Start, select Settings, and click Printers.
Right-click the EPSON Stylus COLOR 440 icon and select Properties.
Click the Details tab, then click the Spool Settings button. Click the
Enable bi-directional support for this printer radio button to turn on
bi-directional support. Click OK twice, then close the Printers window
and try printing again.
Page 136