EPSON Color Copy Station 8200
1.1 Outline
The Color Copy Station 8200 can be connected to EPSON scanner and EPSON
color laser printer. It works not only as a stand-alone copier also as network
scanner adapter. Further more, it offers some web-based functions to confirm
the status of the system, to set the initial parameters, and to update the
system firmware.
1.1.1 Features
o
Target Scanner and Printer
n
EPSON Color Laser Page Printer: EPL-C8200
n
EPSON A3-size Scanner: GT-10000
o
Controller
n
PC/AT architecture
n
CPU: K6-2 300MHz
n
RAM-DIMM 32MB, EEPROM 512B, Flash ROM 12MB
n
IEEE1284 ECP Bi-directional interface for printer
n
Fast SCSI interface for scanner
n
Ethernet 100Base-TX / 10-Base-T interface
n
Special interface for control panel
n
High speed Text-enhancement processing ASIC
n
High speed Moire reduction processing ASIC
n
High speed Edge Sharpening processing ASIC
n
High speed color matching ASIC
o
Software
n
Copy mode matching with various kinds of documents
PHOTO / TEXT / MAGAZINE / MAP / FINE
n
Zoom 25% to 400% in increments of 1%
n
Image Quality Control
Contrast / Brightness / Sharpness / RGB Balance / Croma / Hue
Product Description
n
8 Job memories to save user-defined copy parameters
n
Standard copy protection for bills
n
Network Scanning via network TWAIN driver
n
Useful web-based utilities
WebStatus / WebAdmin / WebUpgrade
n
Flash-ROM update by Board to Board copy.
Figure 1-1. Exterior View of CCS 8200
Outline
Revision A
4