Table of Contents
Advertisement
EPSON Color Copy Station 8200
4.1 Overview
This section describes procedures for disassembling the main components of
Color Copy Station 8200. Unless otherwise specified, disassembly units or
components can be reassembled by reversing disassembly procedure.
Precautions for any disassembly or assembly procedures re described under
the heading "CAUTION" or "WARNING". Any adjustments required after
disassembling the units are described under the heading "Required
Adjustment". Also, read precautions below before starting.
4.1.1 Precaution
A lithium battery is installed on the other board of this product for backing up
the system clock. Since mishandling the battery may cause explosion or
short-circuit, read carefully the following precautions.
n
Disconnect the power cable before disassembling or
assembling.
n
A lithium battery is installed on the mother board of this
product. Be sure to observe the following instructions
when servicing the battery:
1. Do not get the battery short-circuit.
2. Do not install the battery in the wrong direction.
3. Do not heat the battery or put it near fire.
n
Since the cooling fan inside of this product doesn't have a
cover, do to touch it when it is running.
n
Handle with care for the electric parts inside of this
product, since electrostatic may damage the elements.
Risque d'explositon sie la pile est remplacée
incorrectment.Ne remplacer que par une pile du même type
équivalent recommande par le fabricant. Eliminer les piles
déchargées selon les lois et les règles de sécurité en
vigueur.
Disassembly and Assembly
4.1.2 Tools
Use only the specified tools to avoid damaging the product.
Tool Name
Phillips Screw
Driver (no.1)
Phillips Screw
Driver (No.2)
Nipper
Tweezers
Overview
Table 4-1. Tools
Supplier
Parts No.L
EPSON
B743800400
EPSON
B743800200
EPSON
B740500100
EPSON
B741000100
Revision A
45
Advertisement
Table of Contents
