Table of Contents
Advertisement
EPSON Color Copy Station 8200
5.1 Adjustment
This chapter explains the following adjustments which are required to
do for maintenance.
o Color Calibration Function
o Mechanical Precision Adjustment
o Hardware Check
5.1.1 Hardware Check
This function is used to check the hardware of the copy server. This
function presupposes to be used for the manufacture inspection and
when the servicemen consulting trouble or failure.
CHANGING THE MODE
Turn on the power supply of the copy server with "0", ".", and "C" on the
control panel is pushed at the same time. The screen changes to the
maintenance mode main screen.
TEST MODE
[1] PANE_IMOT_CHECK
[2] ISA_BOARD_CHECK
[3] ECP_BOARD_CHECK
[4] FLASH_SUM_CHECK
[5] H/W_CHECK_PRINT
[6] SIZE_CORRECT
EXCIT STOP BUTTON
Adjustment
VARIOUS HARDWARE CHECK
o LCD panel check
o ISA board check
o ECP board check
o Flash ROM check sum confirmation
o H/W all check print
o size collection
5.1.1.1 LCD Panel Check
This hardware check function checks each component of the control
panel. On the maintenance mode main screen, if you press the "1" of
ten key, the panel unit check main menu appears as shown below.
[1] PANEL_UNIT_CHECK
o ALL BLACK Check
Adjustment
1. ALL BALCK
2. GRAY SHADE
3. DISPLAY ON/OFF
4. BLACK LIGHT ON/OFF
5. LED ON/OFF
6. TEN + SPECIAL KEY
7. TOUCH KEY
8. ALL CHECK
9. MAIN MENU
Revision A
57
Advertisement
Table of Contents
