Scsi Board Removal; Network Board Removal; Ecp Board Removal - Epson ColorCopy Station 8200 Service Manual

EPSON Color Copy Station 8200
Table 4-2. PCI/ISA Slot, installing board
Slot Type
PCI1 PCI
PCI2 PCI
PCI3 PCI
PCI4/SLOT1 PCI/ISA
SLOT2 ISA
NOTE: Leave SLOT2 available for installing ISA Master Board.
Disassembly and Assembly
Installing Board
ECP Board (for printer interface)
SCSI Board (for scanner interface)
Network Board
ISA Board
Blank (for installing ISA Master Board)
Disassembly and Assembly

4.2.2.2 SCSI Board Removal

1. Remove the upper case. (See "Upper Case Removal" on page 46)
2. Remove one screw (SMH/W6#X6N) securing SCSI board to the body
case.
3. Remove SCSI board from the slot (PCI2) of the mother board. (See "ISA
Board Removal" on page 46)
4. Install the SCSI board to the appointed slot to stabilize operation.
NOTE: Install SCSI Board to the specified slot for stable movement.
NOTE: Screw tightening tongue: 11 ± 0.5kgf.cm

4.2.2.3 Network Board Removal

1. Remove the upper case. (See "Upper Case Removal" on page 46)
2. Remove one screw (SMH/W6#X6N) securing the Network board to the
body case.
3. Remove Network board from the slot (PCI3) of the mother board. (See
"ISA Board Removal" on page 46)
NOTE: Screw tightening tongue: 11 ± 0.5kgf.cm

4.2.2.4 ECP Board Removal

1. Remove the upper case. (See "Upper Case Removal" on page 46)
2. Remove one screw (SMH/W6#X6N) securing the ECP board to the body
case.
3. Remove ECP board from the slot (PCI1) of the mother board. (See "ISA
Board Removal" on page 46)
NOTE: Screw tightening tongue: 11 ± 0.5kgf.cm
Revision A
47