Cleaner, Head Replacement - Epson STYLUS 4001968 Service Manual

STYLUS 800 Service Manual

3.2.5.3 CLEANER, HEAD Replacement

[Step 1] Remove the PUMP UNIT. (Refer tosection3.2.5.2.)
[Step 2] Remove the CLEANER, HEAD from the pump unit.
Keeping the CLEANE& HEAD clean is extremely important to keep the ink injection
system working properly in the printhead, and it directly afiects printing quality.
Therefore, handle the CLEANER, HEAD vey carejidly, and observe the following
instructions.
tweezers to handle it.
Ca
Slit
Figure 3-10. CLEANER, HEAD Replacement
CLEANER, HEAD
Hook the CLEANER, HEAD to
the cap unit by turn up the part of it.
Disassembly and Assemb/y
HEAD
CLEANER,