Changing The Feed Belts - Duerkopp Adler 550-16-23 Service Instructions Manual

5.3.2

Changing the feed belts

3
8 5 10
11
2 1
Caution: danger of injury
Turn off the main switch.
The feed belts may only be changed with the machine switched off.
Remove the sewing foot with feed belts.
–
Raise the sewing foot and lock it in the up position with
press-button 1.
–
Undo screw 2 and remove the guard 3.
–
Undo screw 8 and relax the front tension roller 5.
–
Undo screw 11 and relax the rear tension roller 10.
–
Remove both feed belts from the drive pulleys 9.
–
Undo screws 6 and remove the mounting plate 7.
–
Undo the sewing-foot attachment screw 4 and remove the sewing
foot with feed belts.
NB:
On machines delivered before October 2000 the belts are different:
the narrower, right-hand belt is longer.
The differences can be found in the parts list.
9 8 7 6 5 4
3
23