Duerkopp Adler 550-16-23 Service Instructions Manual page 25

9
9 8 7 6
Fitting the sewing foot with feed belts
–
Place the feed belts on the drive pulleys 9.
–
Place the feed belts 15 and 16 on the sewing-foot rollers, mount
the sewing foot on the presser bar and secure with screw 4.
5 4
–
Fit the mounting plate 7 and secure with screw 6.
–
Adjust the feed-belt tension (see section 5.3.3).
–
Put on the cover 3 and tighten with screw 2.
4 16 15
3 2
3
25