Bobbin-Housing Holder - Duerkopp Adler 550-16-23 Service Instructions Manual

4.4 Bobbin-housing holder

14
2 1
Caution: danger of injury
Turn off the main switch.
The bobbin-housing holder may only be adjusted with the machine
switched off.
Regulation and inspection
The gap between the bobbin-housing holder 1 and the centre of the
shuttle 2 must be at least equal to the thickness of the yarn so that the
yarn can pass freely through it.
Adjustment
–
Undo screw 3.
–
Set pin 1 to the centre of the shuttle.
–
Retighten screw 3.
3 1