Position Of The Clamps To The Feed Plate - Duerkopp Adler 506 Service Instructions Manual

4.2 Position of the Clamps to the Feed Plate

16
The clamps 2 must be aligned congruent to the recess 1 in the
feed plate 3.
1 2 3
Caution Risk of Injury !
Turn the main switch off.
Align the clamps only with the main switch turned off.
–
Loosen the screws 5 on the clamp bracket 4 slightly.
–
By sliding the clamp bracket 4 align the clamps 1 and 2 congruent
to the recess in the feed plate 3.
–
Tighten screws 5.
4 5