6.3 Main screen
22
–
Switch on the main switch 1 (turn in clockwise direction).
The control unit loads the machine program.
The start screen is displayed on the display screen of the
operating panel.
= Seam pattern is active seam in program
= Pedal Start
= Designation of the program (M01)
A program can comprise several seams ( 4, 6)
= Seam number of the active program
= Adjusting the upper feed (only stepper motor version)
Increasing or decreasing the value using the plus/minus symbols
= Adjusting the lower feed (only stepper motor version)
Increasing or decreasing the value using the plus/minus symbols
= Calling up the machine parameters
= Automatic seam change
= Adjusting the puller
= Adjusting the puller transport
= Daily pieces counter
= Display of the current seam