Hanna Instruments HI 9828 Instruction Manual page 45

• With the keyboard insert the identification num-
ber and then press OK.
• The tag info screen appears. Press OK to go
back to the previous screen or MODIFY to
modify the tag ID.
NOTE: If the inserted ID is not present in the memory, a warning message
appears.
Add tag manually
It is possible to add a new tag to the list even if
the tag is not available.
• Select the option and press OK.
• Insert the tag serial number with the keyboard
and then press OK.
Clear tag memory
It is possible to clear completely the tag memory.
• Select the "Clear tag memory" entry and press
OK.
• The message "All tag identifiers will be erased.
Continue?" appears.
• Press YES to erase or NO to go back to the
previous screen.
To go back to measurement mode press ESC repeatedly.
45