Table of Contents
Advertisement
different file name" appears. Press OK to insert a different name.
• Add a remark: press YES or NO. If YES is pressed and a remark list already
exists, it is possible to select the desired annotation or press NEW to insert a new
remark; a textbox appears for inserting a note for the logged sample.
• Tag reading: the last option allows to associ-
ate the logged sample to a tag. "Touch the tag
with the tag reader" appears. Press SKIP if no
tags are available.
• Touching the tag the relative ID appears. If no
ID is associated to the tag, the serial number appears.
• Press TAG ID to insert an identification code for the used tag and then press
OK.
NOTES: It is possible to create the logging list and the relative remarks before
taking measurements and logging. See paragraph 5.2 Log data Setup.
It is possible to abort the logging procedure at any time, by pressing the
ESC softkey repeatedly.
In case of continuous logging, the data collection will start after the
last options will be confirmed instead of a single log where the data will
be stored after LOG is pressed.
5.2 LOG DATA SETUP
To set lots, insert remarks, review logged or plot-
ted data and also to delete lots, from the main
menu select LOG DATA with the arrow keys.
A list of available functions appears.
5.2.1 Lots
This option allows to insert a new lot or to select the lot where to memorize the
next sample.
41
Hide quick links:
Advertisement
Table of Contents
