Hanna Instruments HI 9828 Instruction Manual page 15

CONDUCTIVITY
Range
Resolution
Manual
Automatic
Automatic mS/cm
Accuracy
Calibration
RESISTIVITY
Range
(depending on setup measurement)
Resolution
Calibration
TDS
Range
Resolution
Manual
Automatic
Automatic g/L (ppt)
Accuracy
Calibration
1 μS/cm; 0.001 mS/cm; 0.01 mS/cm;
1 μS/cm from 0 to 9999 μS/cm
0.01 mS/cm from 10.00 to 99.99 mS/cm
0.1 ms/cm from 100.0 to 400.0 mS/cm
0.001 mS/cm from 0.000 to 9.999 mS/cm
0.01 mS/cm from 10.00 to 99.99 mS/cm
0.1mS/cm from 100.0 to 400.0 mS/cm
± 1 % of reading or ± 1 μS/cm whichever is greater
automatic 1 point with 6 memorized standards
(84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm,
80.0 mS/cm, 111.8 ms/cm) or custom point
dependent on resistivity reading
based on conductivity or salinity calibration
(the maximun value depends on the TDS factor)
1 mg/L (ppm); 0.001 g/L (ppt);
0.01 g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt)
1 mg/L (ppm) from 0 to 9999 mg/L (ppm)
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt)
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt)
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt)
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
± 1 % of reading or ± 1 mg/L (ppm) whichever is greater
based on conductivity or salinity calibration
0.000 to 200.000 mS/cm
(actual EC up to 400 mS/cm)
0.1 mS/cm; 1 mS/cm
0 to 999999 Ω/cm;
0 to 1000.0 kΩ/cm;
0 to 1.0000 MΩ/cm
0 to 400000 mg/L or ppm;
15