Others; Connecting Portable Audio Players To The Aux Jack; Switching The Input System; Changing Auxiliary Input Sensitivity - Eclipse CD7000 Owner's Manual

Others

Connecting portable audio
players to the AUX jack
Use a commonly available accessory cord with
the RCA connector to connect a portable audio
player to the AUX (auxiliary) jack of this system.
Turn on the portable audio player
1
and start its play function.
2
Switch to AUX mode.
For details, refer to "Switching Audio
Modes" on page 17.
ATTENTION
• While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility
by turning off system power or switching
from AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level of the connected player is
known.
• Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and
operation in the vehicle before proceeding.
confirm problem-free

Switching the input system

When using an optional AUX cord (AUX105), the
main unit can be switched between RCA input
and input from the optional AUX cord (AUX105).
Press the [MODE] button for more
1
than one second.
The system will switch between RCA
input and the optional AUX cord each
time the button is pressed.
RCA input (Input)
cord (Sub input)

Changing auxiliary input sensitivity

The sensitivity of the auxiliary mode can be
changed.
Press the [CUSTOM] button for
1
more than two seconds.
The Menu
activated.
Press the [SELECT] (Upper/Lower)
2
to select FUNC then press the
[ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/Lower)
3
button to
Sensitivity.
4
Press the [ENTER] button.
The AUX sensitivity
activated.

Others

Optional AUX
l
Selection mode
select the AUX
mode
101
is
is
XVIII
XIX