Automatic Map-Switching; Guidance Tone - Eclipse CD7000 Owner's Manual

Automatic map-switching

When automatic map-switching is set to ON, the
system will automatically switch to the next map
when you have passed a guidance point.
Press the [RTN] button for more
1
than one second.
Automatic map-switching is turned ON
or OFF each time the button is
pressed for more than one second.
ATTENTION
• The map is switched in the following order
when automatic map-switching is turned
ON.
Starting position map displayed
Vehicle position mark moves outside
the range of the displayed map.
Guidance point route map displayed
The vehicle position mark enters the
range of the next guidance point map
Guidance point map displayed
Vehicle position mark moves outside
the range of the displayed map.
Guidance point route map displayed
Guidance point route map and guidance
point map displays continue to alternate
Map of the destination point displayed
How to operate the Area Shot function (U.S.A./CANADA only)
*:The guidance point route map may not be
displayed if the distance to the guidance
point is too short.
• When in automatic map-switching mode,
pressing
button to display the next or previous map
will turn automatic map-switching OFF.
Press and hold the [RTN] button for more
than one second to turn map-switching on
again.

Guidance tone

A guidance tone can be set to sound at certain
times, such as when the map is switched or
when entering the vicinity of a guidance point
(within about a 0.2 mile or 0.3 km radius).
Press the [CUSTOM] button for
1
more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/Lower)
2
*
button to select FUNC then press
the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/Lower)
3
button to select AreaShot then
press the [ENTER] button.
The Area Shot setting mode is
activated.
Press the [SELECT] (Upper/Lower)
4
button to select Tone Volume then
press the [ENTER] button.
The Tone Volume setting mode is
*
activated.
Press the [SELECT] (Upper/Lower)
5
*
button to adjust the tone volume.
The volume can be adjusted to 8
different levels, from OFF to 7.
the [SELECT] (Upper/Lower)
X
59