Displaying The Clock; Others - Eclipse 55090 Owner's Manual

Basic operation
[AUDIO CONTROL] button
n Displaying the clock
1 .
n Others
t Disabling the guide tone feature (for button
operation)
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may
be disabled in the following procedure:
1 . Press and release the [FUNC] button.
2. Press and hold button [6] until the [BEEP OFF]
3. Press the [FUNC] button again.
t Setting the clock
This receiver uses the 12-hour A.M. / P.M. display notation.
1 . Press the [DISP] button repeatedly to switch to the
2 . To adjust the hour, press either button [1] or [2]
26 26
[DISP] button
Buttons [1] to [6]
Press the [DISP] button repeatedly until the
time is displayed.
Refer to the section on "Setting the clock" to set the
time display.
display appears on the screen.
Pressing the button will switch modes between the
[BEEP ON] and the [BEEP OFF].
clock adjustment mode.
while holding the [DISP] button down.
Button [1]: Turns the hour back.
Button [2]: Turns the hour forward.
[FUNC] button