How To Change The Memory Stick; How To Resume Normal Operation (Esn Security Lock Out); Canceling Esn Security Lock Out Using Security Code Entry; Canceling Esn Security Lock Using Memory Stick - Eclipse CD7000 Owner's Manual

Various Settings
How to change the Memory
Stick
You can change the Memory Stick and security
code that have been recorded by the main unit to
a different Memory Stick and security code.
Cancel the security code that has
1
been recorded with the main unit.
Refer to "How to cancel the Memory
Stick security" on page 46.
Re-record the new Memory Stick
2
and security code that you would
like to use.
A [SEC] message appears, then in two
Refer to "How to record a security
code" on page 46.
How to resume normal
operation (ESN security lock
out)
If power is disconnected while ESN security is
active (a security code was recorded), operation
is disabled until power is restored and the main
unit unlocked. Follow this procedure to resume
normal operation.
ESN security lock can be canceled by directly
entering the security code into the main unit, or
by using the Memory Stick that was being used
when the security code was recorded.
Canceling ESN security lock out
using security code entry
When the power is turned on after
1
disconnecting the battery power, a
[SEC] message will appear for two
seconds. Thereafter,
changes to [- - - -] (Security code
input display).
48
A security code is entered by
2
pressing the buttons [1] to [4].
Enter a four-digit security code using
digits 0 to 9, A to F.
Press the [SCREEN] button for
3
more than one second.
If the security code matches the code
recorded by the main unit, [OK] will
appear on the display and the security
function will be canceled.
ATTENTION
• If the security code does not match the
information recorded by the main unit,
[ERR_] (ERR and the error number) will
appear on the display for two seconds, and
then [- - - -] (security code entry display) will
appear. If this happens, check the security
code and repeat the procedure from step 2.
• If [ERR5] (the 5th time an error has
occurred) appears, [HELP] will appear.
When
operations for an ESN security lock out by
following the procedure in "What happens if
a
incorrect?" on page 49.
Canceling ESN security lock using
Memory Stick
When the power is turned on after
1
disconnecting the battery power, a
[SEC] message will appear for two
seconds.
changes to [- - - -] (Security code
input display).
message
[HELP] appears,
Memory Stick or
Thereafter,
carry out the
security code is
message