Others; Connecting Portable Audio Players To The Aux Jack - Eclipse CD1200G Manual

Others

[VOL]
button
[SELECT] button

Connecting portable audio players to the AUX jack

Use a commonly available accessory cable with stereo 3.5mm mini jack
cable and connect it to the AUX input terminal.
The default setting for AUX is OFF.
1
Turn on the portable audio player and start its play function.
The AUX mode is activated.
For details, refer to "Switching Audio Modes" on page 24.
While the AUX mode is activated, actions such as turning off the
●
audio player or pulling out the connection cord may cause noise
ATTENTION
spikes that can damage the system speakers. Be sure to avoid this
possibility by turning off system power or switching from AUX mode
to another mode before shutting off or disconnecting the portable
audio player.
Audio output levels will differ for the various devices that can be
●
connected by this method. Carefully adjust volume until the output
level of the connected player is known.
Before using a portable audio player in a vehicle, read the player's
●
operation manual carefully and confirm problem-free operation in
the vehicle before proceeding.
[FUNCTION]
button
71 71 71 71
Others