How To Operate The Tuner; Tuning To A Station - Eclipse CD5425 Owner's Manual

How to operate the tuner

How to operate the tuner
[FM AM] button
First, press the [FM AM] button to start tuner operation.
There are automatic and manual methods for setting stations in
memory. The receiver will accept up to 24 stations in memory: 6 in
AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting)

Tuning to a station

Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left:
Press the [ ] or [
search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
● At times, it may be difficult to maintain optimum reception because
● When an optional HD Radio tuner unit is connected, digital
Tunes to lower frequencies.
] button to start the automatic station
the antenna affixed to your vehicle is in motion constantly (relative
to the broadcast antenna), encountering continuous variation in the
received radio signals' strength. Other factors affecting reception
include interference from natural obstacles, sign posts, etc.
broadcasts have reception priority. (U.S.A. only)
[SEL] button
62
[ ] button
[ ] button