5.3
Connecting the sewing machine head to the sewing drive
14
The electrical connection to the machine head is described in
section 4.5.
7 4 1 2
9 3 5
–
Plug the connection cable from the machine head into the plug
connector (1).
–
Plug the cable from the operating panel into the plug connector (2).
–
Plug the connector (3) from the motor sensor (6) into the plug
connector (4).
–
Plug the connector (5) from the motor (6) into the plug
connector (7).
–
Plug the cable from the setpoint (pedal) device (8) into the plug
connector (9).
–
Plug the cable from the handwheel proximity switch into the B18
socket.
6
8