Adjusting The Working Height - DURKOPP ADLER 838 Instruction Manual

3.3

Adjusting the working height

6
–
The stand height can be adjusted between 750 and 900 mm.
–
Loosen the screws (1).
–
Set the horizontal height of the table plate as needed. Check the
scale on the stand spar. The height of the stand should be
appropriate to the height and operating position of the operator.
–
Tighten the screws (1).
Caution Danger of Injury!
Ergonomic-related, operator injuries can result if the stand height is
not adjusted to fit the operator.
1