Connection Of Machine Head Electric Equipment To Drive - DURKOPP ADLER 887 Instruction Manual

5.3

Connection of machine head electric equipment to drive

5.3.1 Connection of head to Efka VD552KV/6F82FA drive
5.3.2 Connection of head to Efka DC1600/DA82GA drive
18
The electric equipment on the machine head is described in chapter
4.6 and 4.7. Its connection to the drive is different depending on the
selected drive type:
4 3
The front panel of the drive box is shown in the picture.
–
Connect the connecting cable to the connector (1).
–
Connect the control panel (if there is any) to the connector (2).
–
Connect the synchronizer to the connector (3).
Note: The pedal position sensor attached to the drive box is connected
to the connector (4).
3
5
2
The front panel of the drive box is shown in the picture.
2
4
1
1