2.
General and transport packaging
3.
Assembling the stand
3.1
Assembling the stand components
4
Caution!
The special sewing machine may only be set up by trained personnel.
Transport packaging
If you have purchased a mounted sewing machine, you must remove
the following packaging:
–
Safety straps and battens from the upper machine head, table and
stand,
–
Safety blocks and straps from the sewing drive.
–
Assemble the stand components according to the illustration.
Fasten the pedal (1) to the stand brace (3). Align the pedal after
you have assembled the complete machine.
–
Turn the adjusting screw (2) to ensure a secure mount on the
stand. The stand must be resting with all four feet on the floor.
3
1
2