Appendix B. Factory Default Settings For The Intel Mebx - Lenovo ThinkCentre M90p Configuration Manual

Appendix B. Factory default settings for the Intel MEBx

The following table introduces the factory default settings for the Intel MEBx.
© Copyright Lenovo 2010
Table 3. Factory default settings for the Intel MEBx
Option Default setting
Intel MEBx default admin
password
Intel(R) ME State ENABLED
Control
Change ME Blank
Password
Password Policy Blank
Host Name Blank
Domain Name Blank
Shared/Dedicated Shared
FQDN
Dynamic DNS DISABLED
Update
DHCP Mode ENABLED
IPV6 Feature DISABLED
Selection
Activate Network Activates the current
Access network settings and
opens the ME
network interface
Continue: (Y/N)
Unconfigure Full Unprovision
Network Access
Current Provisioning Mode:
Provisioning Mode PKI
Provisioning Provision Record is
Record not present
Option
Delete PID and PPS This will delete the PID
and PPS entries.
Continue: (Y/N)
Remote ENABLED
Configuration
PKI DNS Suffix Blank
Manage Hashes
v VeriSign Class 3
Primary CA-G1
v VeriSign Class 3
Primary CA-G3
v Go Daddy Class 2 CA
v Comodo AAA CA
v Starfield Class 2 CA
v Verisign Class 3 Primary
CA-G2
Local FW Update Always Open
Qualifier
Secure FW Update ENABLED
Set PRTC Blank
Intel(R) ME ON in Desktop: ON in S0
Host Sleep States
Idle Timeout 65535
Manageability ENABLED
Feature Selection
Username & ENABLED
Password
SOL ENABLED
IDER ENABLED
Legacy Redirection DISABLED
Mode
Default setting
27