Table of Contents
Advertisement
This manual contains information that is important for the proper setup and
maintenance of your touchmonitor. Before setting up and powering on your new
touchmonitor, read through this manual, especially Chapter 2 (Installation), and
Chapter 3 (Operation).
To reduce the risk of electric shock, follow all safety notices and never open
1
the touchmonitor case.
Turn off the product before cleaning
2
Your new touchmonitor is equipped with a 3-wire, grounding power cord.
3
The power cord plug will only fit into a grounded outlet. Do not attempt to fit
the plug into an outlet that has not been configured for this purpose. Do not
use a damaged power cord. Use only the power cord that comes with your
Elo TouchSystems Touchmonitor. Use of an unauthorized power cord may
invalidate your warranty.
The slots located on the back and top of the touchmonitor case are for
4
ventilation. Do not block or insert anything into the ventilation slots.
It is important that your touchmonitor remains dry. Do not pour liquid into or
5
onto your touchmonitor. If your touchmonitor becomes wet do not attempt to
repair it yourself.
T
OUCHMONITOR
C
4
HAPTER
A
P P E N D I X
B
S
AFETY
B-27
Advertisement
Table of Contents
