Elo TouchSystems 1746L Series User Manual page 13

STEP 2-Connecting the Serial or USB Touchscreen Cable
ET1749L shown (ET1746L does not have DVI-I connector)
• Connect the female end of the serial (RS-232) cable to the serial port on your
PC, or connect the USB touchscreen cable to the USB touchscreen connector
on the back of your touchmonitor.
•
• Connect the male end of the serial cable to the serial touchscreen connector
on your touchmonitor, or connect the other end of the USB touchscreen cable
to your PC.
•
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
• DO NOT connect the serial and the USB cables. Connect one or the other,
but not both.
SERIAL OR USB TOUCHSCREEN CABLE
FEMALE 9-PIN SERIAL USB CONNECTOR
TOUCHSCREEN CONNECTOR
2-9