Front Wheel - Yamaha WR250XZ(C Owner's Manual

a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
PERIODIC MAINTENANCE AND ADJUSTMENT

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolts and axle nut.
1
1. Front wheel axle pinch bolt
2. Axle nut
7-40
EAU24360
1
EAU45161
EWA10821
2
1. Front wheel axle pinch bolt
2. Wheel axle
2. Lift the front wheel off the ground
according to the procedure on
page 7-39.
3. Remove the axle nut.
4. Pull the wheel axle out, and then
2
remove the wheel. NOTICE: Do
not apply the brake after the
wheel has been removed to-
gether with the brake disc, oth-
erwise the brake pads will be
forced shut.
To install the front wheel
1. Lift the wheel up between the fork
legs.
7
[ECA11071]
EAU45171