Yamaha WR250XZ(C Owner's Manual page 82

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Do not touch the glass part of the bulb.
1. Remove the headlight cowling to-
gether with the headlight unit by
removing the bolts and pulling up-
ward as shown.
1
7
1. Bolt
2. Disconnect the headlight coupler,
and then remove the bulb cover.
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
1
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
1
6. Install the headlight cowling (to-
7. Have a Yamaha dealer adjust the
2
7-37
and then connect the coupler.
gether with the headlight unit) by
placing it in the original position,
and then installing the bolts.
headlight beam if necessary.