Yamaha WR250XZ(C Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
1. Stopwatch indicator "
4
2. Tripmeter A indicator "
pensation tripmeter "
3. Tripmeter B indicator "
TIP
G
The multi-function display can be
set to the basic mode or the mea-
surement mode.
G
Tripmeter A will automatically re-
set to zero when changing from
the basic mode to the measure-
ment mode or vice versa.
Basic mode:
G
a speedometer
G
an odometer
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G
a clock
G
a self-diagnosis device
"
Measurement mode:
"/Distance-com-
G a speedometer
"
G
" a distance-compensation tripme-
ter (which shows the accumulated
distance traveled since set to zero
and which can be calibrated to pro-
vide a more accurate tripmeter
reading)
G
a stopwatch (which shows the time
that has been accumulated since
the start of stopwatch measure-
ment)
G
a self-diagnosis device
TIP
G
Be sure to turn the key to "ON" be-
fore using the "SELECT 1", "SE-
LECT 2" and "RESET" buttons.
G
G
Basic mode
Odometer and tripmeter modes
Push the "SELECT 2" button to switch
the display between the odometer
mode and the tripmeter modes A and B
in the following order:
odometer → tripmeter A → tripmeter B
→ odometer
4-4
When the key is turned to "ON", all
of the display segments of the
multi-function display will appear
and then disappear, in order to test
the electrical circuit.
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT 2" button until the
display changes after the key is
turned to "ON".