10.2 Lubrication - DURKOPP ADLER 367 Operating Instructions Manual

10.2 Lubrication

Maintenance work
to be carried out
Lubricating the upper part of
the machine
Lubricating the shuttle
1
Caution: danger of injury
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In the event of contact, thoroughly wash the affected area.
CAUTION:
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorised collection point.
Protect your environment.
Take care not to spill oil.
To lubricate the special sewing machine use only DA-10 lubricating oil
or an equivalent oil of the following specification:
–
Viscosity at 40° C:
–
Flashpoint:
DA-10 is available from DÜRKOPP ADLER AG retail outlets under the
following part numbers:
250-ml container:
1-litre container:
2-litre container:
5-litre container:
Explanation
The upper part of the machine is fitted with a
central oil-wick lubrication system. Except for the
shuttle all lubrication points are supplied from
the oil reservoir 1.
- The oil level must not fall below the"MIN"
mark.
- Top up through the holes in the sight glass to the
"MAX" mark.
- Turn back the upper part of the machine.
- Check oil supply through viewing window 3.
- Fill the oil reservoir through the nipple 2.
- The quantity of oil required to lubricate the
shuttle properly is factory-set.
2
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
3
Operating
hours
40
8
39