Maintenance; 10.1 Cleaning And Testing; Maintenance 10.1 Cleaning And Testing - DURKOPP ADLER 367 Operating Instructions Manual

10.

Maintenance

10.1 Cleaning and testing

4 3
Maintenance work
to be carried out
Upper part of machine
- Remove lint, pieces of thread
and other debris
(e.g. with a compressed-air pistol)
Caution: danger of injury
Turn off the main switch.
Maintenance may only be carried out with the machine switched off.
Maintenance work must be carried out no less frequently than at the
intervals given in the tables (see "operating hours" column).
Maintenance intervals may need to be shorter when processing
heavy-shedding materials.
A clean machine is a trouble-free machine.
2 1
Explanation
Places in special need of cleaning:
- underside of needle plate 4
- feeders
- area around shuttle 2
- bobbin housing 3
CAUTION !
Hold the compressed-air pistol so that the lint is
not blown into the oil collector 1.
- thread cutter
Clean the area under the thread clipper 1
especially thoroughly
(there may be problems with the
thread cutter 5)
- needle area
5
Operating
hours
8
37