Machine-Arm Keypad (Subclass-170115; -170315; -180115; -180315) - DURKOPP ADLER 367 Operating Instructions Manual

6.14 Machine-arm keypad (subclass -170115; -170315; 180115; 180315
LED Key
2
1
3
*)
4
*)
5
6
7
8
*)
9
*)
10
Function
Position the needle in the up or down position.
The function of key 2 can be determined with the F-140 parameter.
1 = needle up, 2 = needle up/down, 3 = single stitch
4 = single stitch with 2nd stitch length / short stitch
5 = needle up if out of position 2.
The factory setting is 1 = needle up.
Manual backwards sewing.
The machine sews backwards while key 1 is held down.
Trigger or suppress starting or ending bar tack.
If starting or ending bar tacks are generally switched on, pressing this key
switches the next one off.
If starting or ending bar tacks are generally switched off, pressing this key
switches the next one on.
2nd Stitch length
2nd Thread length
LED display "mains on"
LED display: no function
LED display for key 3
LED display on = 1st (upper) Stitch length active
LED display off = 2nd (lower) Stitch length active
LED display on = 2nd Thread tension active
LED display off = 2nd Thread tension off
*)
)
*)
6 7 8 9
*)
1 2 3 4
*)
10
*)
5
21