Changing The Fm/Am Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format); Removing The Limitation On Hdmi Video Output (Mon.chk); Restoring The Default Settings (Init) - Yamaha RX-V673 Owner's Manual

Changing the FM/AM tuning frequency setting (TU)

(Asia and General models only)
TU FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz
FM100/AM10
steps and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9 (default)
and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

TV FORMAT NTSC
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea and General models: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MON.CHK)
MON.CHK YES
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution"
(p.95) when the unit cannot detect the TV's resolution or when you want to specify a
different resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a
YES (default)
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after "MON.CHK" has been set to "SKIP".

Restoring the default settings (INIT)

INIT CANCEL
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
106
En