Menu Operation; User Setting - ViewSat VSMAXHD User Manual

MENU OPERATION

7. MENU OPERATION
The main menu is classified into several sub menus which will carry out the
various operation individually.
MAIN MENU
After installing your dish system and receiver with appropriate connectors, plug in
the AC main power and turn on the receiver.
Favorites"menu and "Installation"menu. The default factory PIN code is "0000".
Press the "menu" key or "exit" key to return to previous menu.

1. USER SETTING

This menu helps you to set up System. Select "User Setting" menu in "Main Menu", and
will be asked to enter your PIN Code.
15
Press the MENU key of the RCU. You
will see the "Main Menu" on the TV
screen as follow.
Please note that the "Common Interface"
menu will be displayed for the CI Model.
You can move into the desired submenu
Using the "left/right / up / down
" keys(◀.▶,▲.▼ ).
Press "OK" key to confirm your selection.
If the "Main Menu" is locked, note that
you should enter the PIN code in order
to move into the corresponding submenu
in case of "Edit Channels "menu,"Edit
1. A. PARENTAL CONTROL
This function prevents children or
unauthorized persons from watching
programs.
Also you can change PIN(Personal
Identification Number) code.
Select "Parental Control"menu in
"User Setting" menu, and the following
screen will be displayed.
1.A.1 Receiver Lock
To lock receiver, select "Receiver Lock"in the "Parental Control"menu and change it
to "On" mode using the "left/right"keys (◀.▶).
1.A.2 Menu Lock
To lock the Main Menu, select "Menu Lock"in the "Parental Control"menu and
change it to "On"mode using the "left/right"keys (◀.▶).
1.A.3 Maturity Rate
You can set the maturity rate of the receiver. If program rate is higher than the
receiver, PIN code window will appear.
1.A.4 Change PIN Code
You can change your PIN code from factory default value "0000"as follows:
Select "Change PIN Code"in the "Parental Control".
Press "OK"key. Then you will be asked for a new PIN code.
Once you enter a new PIN code, the receiver will ask you to enter it in again.
After you enter a new PIN code twice, the PIN code is changed permanently.
If you forget the PIN code, you need to contact the distributor to reset the PIN.
1. B. TIME SETTING
You can change the time of your
receiver and also switch on/off the timer
function in this menu.
Select "Time Setting" item in the " User
Setting" menu and the following screen
will be displayed.
16