Scanning Time Programs
Central heating time program
1-7
DHW time program
1-7
Press the following keys:
1. ur+i press and hold down
simultaneously for central
heating time program; the
set time phases will then be
displayed on a time slot
graphic.
If "Select htg. circuit" is displayed
and "1r" flashes:,
H Select that heating circuit with
⊕ / ⊝, to which the adjustment
should apply.
H Confirm twice with
H Again, press and hold down
"ur+i simultaneously; a time
slot graphic shows the selected
time phases.
For changing the time program, (see
page 26).
1. uw+i press and hold down
simultaneously for DHW
time program; the set time
phases will then be
displayed on a time slot
graphic.
.
Note:
For changing the time program, (see
page 26).
Scanning Options
33