Selecting Dhw Heating Only Once - Viessmann Vitodens 200-W Operating Instructions Manual

Selecting DHW Heating
Selecting DHW Heating for a Few Hours Only

Selecting DHW heating only once

Party mode
68
30
The following function enables you to heat DHW once, without permanently altering
your settings. For this, select "Party mode" "g".
The following function enables you to
heat DHW once, without permanently
altering your settings. For this, select
"Party mode" "g".
Precondition:
H Not in "Standby mode" "9" and not
in the "Holiday program" "j".
H The DHW temperature must be below
the set value.
Press the following keys:
1. g for "Party mode"; the value of
the party temperature flashes.
ºF
If "Select htg. circuit"; is
displayed and "1r" flashes:
H Select that heating circuit
with ⊕ / ⊝, to which the
adjustment should apply.
H Confirm twice with
H "g" again for "Party mode";
the party temperature flashes.
2. to confirm; DHW heating
begins.
3. After approximately 10 sec., press
"g" again.
(continued)
.