Setting a Permanent Room Temperature
Selecting a reduced room temperature
Red. room temp.
ºF
57
m
(continued)
Press the following buttons:
1. tm
for "Red. room temp.", the
current temperature will flash.
If "Select htg. circuit" is
displayed and "1r" flashes:
H Select the heating circuit
with ⊕ / ⊝, to which the
central heating should apply.
H Confirm twice with
H tm again for the "Red. room
temp.", the current
temperature selection will
flash.
2. ⊕/⊝ for the required temperature.
If "Select htg. circuit" is
displayed and "1r" flashes:
3.
to confirm; the temperature no
longer flashes and is saved.
4.
to exit the setting menu.
Adjusting the Room Temperature
Note:
When setting the reduced room
temperature to 37ºF / 3ºC, "Frost
protection" will be displayed.
.
19