Settings Time Programs - Viessmann VITOTRONIC 300 GW2 Operating Instructions And User's Information Manual

Settings
Time programs
12
You can select time programs for heating, domestic hot water (if a DHW tank is
installed) and the DHW re-circulation pump (if installed). The DHW re-circulation
pump ensures that hot water is available at the taps when required.
A time program consists of 4 time cycles, i.e.
the heating can be switched up to 4 times per day to and from between the
"normal room temperature" and the "reduced room temperature".
the domestic hot water supply and DHW re-circulation pump can be switched
on and off up to 4 times per day.
Time cycle 1 is preset in the factory for all days of the week, i.e. during this
time heating takes place with the normal room temperature, domestic hot
water heating takes place and the DHW re-circulation pump is switched on.
The following buttons are assigned to the time programs:
Button Time program for
ur heating
uw domestic hot water
up DHW re-circulation pump
You can set identical time programs for all days of the week or individual time
programs for each day of the week.
When setting the time programs, please take into account the reaction time of the
heating system. Therefore, choose correspondingly earlier starting and finishing
times.
Factory setting
normal room temperature:
06:00 to 22:00 hrs
ON:
05:30 to 22:00 hrs
ON:
05:30 to 22:00 hrs