Printing To A Labelwriter Twin Turbo Printer; Using Both Label Rolls - Dymo Label v.8 User Manual

To choose printer
1
2

Printing to a LabelWriter Twin Turbo Printer

The LabelWriter Twin Turbo printer features two side-by-side label printers in one enclosure
allowing you to have two types of labels loaded and ready for printing.
If you have a LabelWriter Twin Turbo printer installed on your computer, each label roll shows up
in the printer list as a separate printer. The label roll that you will print to is indicated by a green
arrow and is bordered in blue . For example:
When printing to a Twin Turbo printer, you must select the printer that has the label roll you want to
print to highlighted.

Using Both Label Rolls

The LabelWriter Twin Turbo printer can automatically switch from one label roll to the other when
you need to print more labels than are left on a roll. For example, suppose you are printing a
mailing list that contains 225 addresses and the left label roll only contains about 100 labels. You
can select to use both rolls, and when the printer runs out of labels on the left roll, the labels
automatically begin printing on the right roll until all the labels are printed.
Note To use this selection, you must have the same type of labels loaded on each side of the
printer.
To use both rolls
1
2
When you select the Use both rolls check box, the selected printer image changes to show that both
rolls will be used.
34
Click the printer image in the Print area.
All the label printers that are installed on you computer are displayed. However, only the
printers that can print the currently selected label type are available to select.
Select the printer that you want to print to.
The selected printer is displayed in the Print area.
Load the same type of labels on each side of the printer.
Select the Use both rolls check box in the Print area.
Twin Turbo with
Left Roll selected